The leading brand in custom sukkah skylights

FLAT 'A' ROOFS is specifically designed for flat roofs.


Skylights or Roof Hatches comes pitched in order to shed the water off.

  •  ​Manual  

Manual Operated Skylights are operated without any electricity or air power. 

It is simply powered by pulling a chain counter-clockwise to release a latch which causes the skylight or roof hatch to open automatically. 

By pulling the chain clockwise, the skylight or roof hatch will start closing in accordance with the pull.


Its tight seal shut makes it virtually impossible to open during hurricane season or by intrudes - humans, animals and the like.


These type of units can be installed anywhere!


IT IS A GREAT PRODUCT AND IS VERY AFFORDABLE.

IT IS MAINTENANCE FREE.

IT IS DESIGNED AND TESTED FOR GENERATIONS TO COME

  •  ​Air (Pneumatics)

A compressor pumps air into a storage tank which pushes the cylinders to open and close the skylight or roof hatch with a push of a button effortlessly.



  • Slopped

  • "A" Roof Cathedral

  • Flat "A" Roof

operable  systems

  • Size

  • Specific use of room

  • Skylight, Window or Roof Hatch type

  • Type of roof​

​​



  • Roof Pitch (degree)

  • Power Pack System Preference

What You Need To Know To Place Your Order

SKYVIEW SKYLIGHT is the leading brand in custom cut skylights in any shape for residential and commercial use .


Fixed Skylights are primarily a glass 'picture frame' or multiple 'picture frames' together. 

fixed  skylights​: 

Flat 'A' Roof

Cathedral 'A' Roof

CATHEDRAL 'A' ROOFS  is a style roof which will need its skylight to be cut perpendicular to the roof's pitch in order to finish to its center with less than 12", therefore it will be built with an angle. 

standard & custom  wooden frame cuts​: 

OUR WOODEN FRAME  is 1-1/4" thick ply wood with pockets hiding the mechanical hardware. Special custom cuts are available for Cathedral "A" Roofs & Flat "A" Roofs.

OUR SHINGLE ROOF HATCH Shingle Finished Roof Hatches are specifically  designed for the front of your home to blend in with the rest of the roof. 


HOW IT IS DESIGNED:

It is built with aluminum square tubing which is welded together. The center of the frame is filled with 2" dry foam insulation, the outer layer covered by ply wood which your roofer will be able to cover with shingles to blend in with the rest of the roof & the inner finished with cabinet grade wood which is suitable to paint or stain.

  •  ​Shingle Finish

All Glass Skylights are set in an aluminum frame which is welded (not glued or screwed) for strength and waterproof protection. 

Glass is available in clear, frosted or milky white finish; other designed finishes are available upon request. 

OUR ALUMINUM ROOF HATCH is ideally designed for the bedroom or unfinished which you can store your schach and finish it off with a drop ceiling.


HOW IT IS DESIGNED:

Our Aluminum Roof Hatch is built of aluminum square tubing which is welded together. The center of the frame is filled with 2" dry foam insulation, the outer layer is covered by mineral bronze coated aluminum & the inner finished with cabinet grade wood which is suitable to paint or stain.

  •  ​Aluminum 

our   roof hatches​: 

glass  skylights:

*Tempering is a controlled heat treatment technique applied to glass to achieve greater toughness and strength of ductility to create a safer glass. If glass is broken, tempered glass will break into tiny pieces as apposed to large sharp pieces. 


Neat  ®GLASS harnesses the sun's UV rays to loosen dirt so water can rinse it away, leaving windows virtually spotless.

OUR GLASS SKYLIGHTS  Our glass is especially designed to keep the noise level down and provide more light and comfort yet keep the heat out during the summer and insulate your home in the winter. 


HOW IT IS DESIGNED:  The skylights are designed and engineered to their best quality and to achieve their peak performance. All our glass is tempered* for safety, double paneled, Argon (gas) filled center between both panes of glass which is double sealed to prevent Argon from leakage, UV film coated with a center heat mirror membrane that reflects the solar heat back to the sun and minimizes UV rays to less than 1%.